Description
Base PoE is an M5 Base that implements a W5500 Ethernet controller chip with PoE module, which provides Hardwired TCP/IP embedded Ethernet control to facilitate easier internet connection to embedded systems. W5500 integrates TCP/IP protocol stack, 10/100M Ethernet data link layer (MAC) and physical layer (PHY).This base supports RS485 / RS232 communication and can be used as an Ethernet to serial port server. It is specifically designed for industrial applications. PoE (Power over Ethernet) technology is supported. Through the built-in PoE module, power can be directly supplied to the base through PoE hub / switch without a separate power supply. It comes with a couple of HT3.96 connectors, metal rail and magnet discs for easy installation. The 6 pins of the HT3.96 connector are spare, you can wire them up with an RS485 or RS232 adapter board as you like.
Features
– Support PoE IEEE802.3 AF/AT
– DC input supply voltage:9-24V
– Ethernet access
– HT3.96 port for supporting RS485/RS232 communication
– 8 independent hardware socket simultaneous communication
– Support TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE protocols
– Support integrated 10BaseT / 100Base-T Ethernet PHY
– Easy to fixed on the wall
Applications
– Ethernet controller
– Ethernet and RS485/RS232 data forwarding
– Ethernet network node
Package Included
– 1x PoE Base
– 1x TTL-to-RS485 adapter board
– 1x TTL-to-RS232 adapter board
– 1x pin header 20pin
– 1x metal rails and magnet discs
– 3x HT3.96 terminal
* 2x 3pin
* 1x 4pin
– 10x cold crimp terminal（red Copper Lugs）
– 3x Allen wrench
* 1x 1.5mm
* 1x 2mm
* 1x 2.5mm
– 2x hexagon socket head cap screws M3x28
– 4x hexagon socket tapping screw KA2x4
– 1x countersunk head screw M3x8
Specification
Resources:Parameter
Ethernet chip:W5500
Support protocols:TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE
RS485 chip:SP3485EE
RS232 chip:MAX232
PoE power supply mode:Idle network cable pin power supply(10M/100M Ethernet)，J4&J5(VC-),J7&J8(VC+)
PoE specification:IEEE802.3 AF/AT
DC input voltage:9V~24V
Net weight:32g
Gross weight:132g
Product size:54*54*28mm
Package Size:105*65*4mm
EasyLoader:Click to download
EasyLoader is a concise and fast program writer, which has a built-in program related to the product. It can be burned to the main control by simple steps to perform a series of function verification. Please install the corresponding driver according to the device type. M5Core host Please to view the CP210X driver installation tutorial, M5StickC/V/T/ATOM series can be used without driver)
PinMap
M5Stack:GPIO13:GPIO18:GPIO19:GPIO23:GPIO26:GPIO34:GPIO5:GPIO15
W5500 PoE:RST:CLK:MISO:MOSI:CS:INT:RX/A:TX/B
Right side M-BUS pin definition:Click here
Schematic:Click here
Related Link
W5500
SP485EEN
MAX232
Example
Get Arduin code
Additional information
| Weight | 0.146 kg |
|---|
Reviews