Description
Onboard:STM32F767IGT6 chip
Core:Cortex-M7 32-bit RISC
Features:Single-cycle DSP instructions;
Operating frequency:up to 216MHz;
Working voltage:1.8V-3.6V;
Packing:LQFP176;
Storage resources:1024kB Flash, 320kB SRAM;
Resources:6xSPI, 4xUSART, 4xUART, 3xl2S, 1xSAI, 3xl2C; 1xFMC, IxSDIO, 2xCAN;
1 x USB 2.0 FS/HS controller (with dedicated DMA);
1 x USB HS ULP幕 (for external USB HS PHY);
1 x 10/100 Ethernet M AC;
3xAD (12bit, 1us, 24), 2xDA (12 bit);
TIM timer:10X general-purpose timer, 2X advanced timer, 2X basic timer, 1X low-power timer.
Data access FLASH:W25Q128/16MB.
The basic circuit of on-board MCU includes 25MHz, 32.768KHz crystal oscillator circuit, USB power management circuit and USB interface.
Except for on-board SDRAM and GPIO occupied by SPI FLASH, all the pins of the I/O peripheral devices are in the form of 2.54mm pin arrays. All the resources of the chip can be freely used.
With JTAG/SWD debugging and downloading interface.
Four-ply process, stable performance.
Working frequency:up to 180 MHz, 225 DMIPS/1.25 DMIPS/MHZ
Working voltage:1.8V-3.6V
SDRAM:IS42S16400J-7TLI/8MB
Package included
1 x STM32F767 Development Board
Pin Descriptions
1. D2:Power indicator
2. RESET:Reset button
3. J6:USB interface
4. KEY:User button
5. 25MHz x 32.768MHz crystal
6. 3.3V regulator device
7. Flash:W25Q12816MB
8. 2×27 pin headers in two rows, a total of 108 pins:GPIO97, power supply and GND11
9. STM32F767IGT6 chip
10. ISP interface
– 3V3:working voltage positive
– GND:Operating voltage negative
– TX:module serial port send pin (ie PA9)
– RX:module serial port receiving pin (ie PA10)
11:JTAG/SWD debug interface
12:D1 User LED
13:SDRAM:IS42S16400J-7TL18M
Additional information
| Weight | 0.032 kg |
|---|
Reviews