Waveshare SIM7600CE 4G/3G/2G Communication Expansion Board GNSS Positioning for Jetson Nano/STM32

SKU: GP-1754454

$151.66

Waveshare SIM7600CE 4G/3G/2G Communication Expansion Board GNSS Positioning for Jetson Nano/STM32
$151.66

Documents
Manual:Click here to open
Schematic:Click here to open
SIM7600X 4G for Jetson Nano Schematic:Click here to open
Code:Click here to open
SIM7X00 Driver:Click here to open
Datasheet:Click here to open
Overview
The SIM7600CE 4G HAT is a 4G/3G/2G communication and GNSS positioning module, which supports LTE CAT4 up to 150Mbps for downlink data transfer. it is pretty low power consumption.
You can connect this 4G module with computer to surf the Internet, or attach it onto Raspberry Pi to enable functions like 4G high speed connection, wireless communication, making telephone call, sending SMS, global positioning, etc.
Features
Standard 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
Supports dial-up, telephone call, SMS, mail, TCP, UDP, DTMF, HTTP, FTP, etc.
Supports GPS, BeiDou, Glonass, LBS base station positioning
Onboard USB interface, to test AT Commands, get GPS positioning data, and so on
Onboard CP2102 USB to UART converter, for serial debugging
UART control pins, to connect with host boards like Arduino/STM32
SIM card slot, supports 1.8V/3V SIM card
TF card slot for storing data like files, messages, etc.
Onboard audio jack and audio decoder for making telephone call
2x LED indicators, easy to monitor the working status
Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper
Baudrate:300bps ~ 4Mbps (default:115200bps)
Autobauding baudrate:9600bps ~ 115200bps
Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set)
Supports SIM application toolkit:SAT Class 3, GSM 11.14 Release 99, USAT
Communications Specifications
LTE
WCDMA / TD-SCDMA / CDMA 2000
EDGE
GSM/GPRS
Band
SIM7600A-H
SIM7600A-H
Not available
LTE-FDD B2/B4/B12
UMTS/HSPA+ B2/B5
SIM7600E-H
SIM7600E-H
GSM/GPRS/EDGE 900/1800 MHz
LTE-FDD B1/B3/B5/B7/B8/B20
UMTS/HSPA+ B1/B5/B8
LTE-TDD B38/B40/B41
SIM7600CE-T
SIM7600CE-T
LTE-TDD B38/B39/B40/B41
UMTS/HSDPA/HSPA+ B1/B8
LTE-FDD B1/B3/B8
TD-SCDMA B34/B39
CDMA 1X/EVDO BC0
SIM7600G-H
SIM7600G-H
SIM7600G-H
LTE-TDD B34/B38/B39/B40/B41
UMTS/HSDPA/HSPA+ B1/B2/B4/B5/B6/B8/B19
GSM/GPRS/EDGE 850/900/1800/1900MH
LTE-FDD B1/B2/B3/B4/B5/B7/B8
/B12/B13/B18/B19/B20/B25/B26/B28/B66
Generation
4G
3G
2.5G
2G
Emitting power
0.25W
0.5W@EGSM900
2W@GSM900
0.4W@DCS1800
1W@DCS1800
Data Speed
LTE CAT 4
UMTS
EDGE
GPRS
Uplink50 Mbps
Uplink384Kbps
Uplink236.8kbps
Uplink85.6kbps
Downlink150 Mbps
Downlink384Kbps
Downlink236.8kbps
Downlink85.6kbps
HSPA+
Uplink5.76Mbps
Downlink42Mbps
SIM Card
Normal SIM (Not Included)
GNSS Specifications
Receiver type
-16-channel
– C/A code
Sensitivity
– Tracking:-159 dBm (GPS) / -158 dBm (GLONASS) / TBD (BD)
– Cold starts:-148 dBm
Time-To-First-Fix (open air)
– Cold starts
– Hot starts
Accuracy
– Position
SMS and Audio Specifications
SMS
-Supported types:MT, MO, CB, Text, PDU
-Storage:USIM card and ME (default)
Audio feature
-Supports echo cancellation
-Supports noise reduction
Other Specifications
Power supply:5V
Operating voltage:5V/3.3V (configured via jumper)
Operating temperature:-30C ~ 80C
Storage temperature:-45C ~ 90C
Dimension:56.21mm x 65.15mm
Package includes
1 x SIM7600CE 4G HAT
1 x LTE antenna
1 x GPS External Antenna (B)
2 x USB cable type A male port to micro male port
1 x RPi copper pillar package (2PCS set)
What’s on Board
1. SIM7600CE-T
2. CP2102 USB to UART converter
3. NAU8810 audio decoder
4. TXS0108EPWR voltage translator:translates 3.3V/5V into 1.8V
5. MP2128DT power chip
6. MP1482 power chip
7. Raspberry Pi GPIO header:for connecting with Raspberry Pi
8. SIM7600 control interface:for connecting with host boards like Arduino/STM32
9. SIM card slot:supports 1.8V/3V SIM card
10. TF card slot:allows file/SMS/… storage
11. 3.5mm earphone/mic jack
12. USB interface:for testing AT Commands, getting GPS positioning data, etc.
13. USB to UART interface:for serial debugging, or login to Raspberry Pi
14. MAIN antenna connector
15. AUX antenna connector
16. GNSS antenna connector
17. Power switch
18. Network status indicator
19. Power indicator
20. Operating voltage selection jumper
VCCIO – 3.3V:set operating voltage as 3.3V
VCCIO – 5V:set operating voltage as 5V
21. UART selection jumper
A:access Raspberry Pi via USB to UART
B:control the SIM7600 by Raspberry Pi
C:control the SIM7600 via USB to UART

Additional information

Weight 0.229 kg

Reviews

Write review “Waveshare SIM7600CE 4G/3G/2G Communication Expansion Board GNSS Positioning for Jetson Nano/STM32”

Your email address will not be published. Required fields are marked *


Warning: Attempt to read property "post_content" on null in /www/wwwroot/geekpaw.com/wp-content/themes/shoptimizer-child-theme/functions.php on line 714

Warning: Attempt to read property "post_content" on null in /www/wwwroot/geekpaw.com/wp-content/themes/shoptimizer-child-theme/functions.php on line 714

Shipping Methods


Payment Methods

[contact-form-7 id="230e2c7" title="Wholesale Inquiry"]