Instruction
This is a linear conversion module, which is processed by the internal chip to output the PWM data as a voltage signal.
Module parameters
1. Power supply voltage:9V ~ 24V
2. Signal input voltage range:4∥24V
3. Signal input frequency range:5Hz∥500Hz
4. Range of signal input duty ratio:0∥100%
5. Output voltage:0.00V ∥ 5.00V/0.00V ∥ 10.00V
6. Input method:J1 pad on the circuit board:the default is open circuit, which has not been used yet.
7. Output mode:J2 pad on the circuit board:open circuit (output 0.00V ~ 5.00V); short circuit (output 0.00V ~ 10.00V), the default is open circuit.
8. Application range:remote data acquisition and control equipment;
9. Size:(length) 26mm * (width) 23mm * (height) 10mm
10. Module interface
24V:Positive power supply interface (9V ~ 24V).
G:Power ground interface.
IN:Signal input positive port.
G:Signal input negative port.
OUT:Signal output interface (0.00V ∥ 5.00V/0.00V ∥ 10.00V).
G:Power ground interface.
Note:When the output is 0.00V to 10.00V, the power supply voltage must be 15V.
Output (0.00V ∥ 5.00V) Resolution:0.050V/D (Volt/Duty Cycle)
Output (0.00V ∥ 10.00V) Resolution:0.100V/D (Volt/Duty Cycle)
Calculate the measured duty cycle formula:(output voltage (V)/resolution) = duty cycle (%).
For example:output (0.00V ~ 5.00V) output is 2.5V, (2.5(V)/0.05) = 50(%).
Package includes
1 x Transmitter Module
Additional information
Weight | 0.006 kg |
---|
Reviews