Introduction
The wide voltage single-channel controller is a user-friendly, idealized practical wireless control device based on user requirements.
Learning function, single-chip decoding is convenient for customers to support a variety of remote controls.
The three working modes are freely set for users to use for different control functions. The input voltage range is wide, the output is charged, and the output switching signal is more convenient for users to use in different occasions, which increases the application flexibility of the product.
It can be applied to the field of lighting, motor shut-off, security industry machine wireless remote control lamp, with the advantages of convenient installation, simple and safe use.
Feature
Working voltage:DC 12V-48V
Working temperature:-20°C ~ +60°C
Working frequency:433MHZ
Working mode:Jog, self-locking, interlocking (jumping cap on pin)
Load:≤30A
Operating mode
1. Interlock:Press the corresponding button of the remote control, the corresponding relay is turned on, and then press another remote control button, the relay is disconnected.
2. Non-lock/jog:Press the remote control button, the corresponding relay is turned on, release the remote control button, the corresponding relay is disconnected.
3. Self-locking:Press the remote control button once, the relay is turned on, press the remote control button again, the relay is disconnected.
Instructions
(1) Learning code
Press and hold the learning button, the indicator light is off, indicating that you enter the learning state; release the learning button, press and hold the remote control button that needs to be learned, the indicator light flashes five times and then lights up, indicating that the learning is successful.
(2) Clearing code
Press and hold the learning button, the indicator light will turn from on to off, then return to long light, indicating that the clearing is successful.
Remote control technical parameters
Working voltage:DC6V (battery type:2016 3V x 2PCS, includes)
Working frequency:433.92MHz
Standby current:0mA
Working current:16mA
Coding method:Learning code (2260/eV1527/PT2240B chip)
Transmission distance:20m (opening receiver sensitivity is above -103dBm)
Output power:9dBm (8mW)
Transmission rate
Modulation method:OOK (amplitude modulation)
Working temperature:-10°C~+70°C
Size:55 x 30 x 15mm
Number of buttons:2 buttons (A-Open, B-Close)
Package includes
1 x Receive module
1 x Remote control
Additional information
| Weight | 0.115 kg |
|---|
Reviews