Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
This is without watch accessories,If you like with watch accessories
>>>with watch accessories:Click here to BUY
>>>More M5Stack Item:Click here to open
Description
M5Stick is a mini M5Stack, powered by ESP32. It is a portable, easy-to-use, open source, IoT development board.
What it can do This tiny block is able to realize your idea, enlight your creativity, and help with your IoT prototying in a very short time. It will takes away a lot of the pains form the development process.
M5stick is one of the core devices in M5Stack product series which is built in a continues growing hardware & software ecosystem. It has a lot of compatible modules & units, as well as the open source code & engineering community that will help you maximum your good in every step of the developing process.
Item Features
– 5V DC power supply
– USB Type-C
– ESP32-based
– 4 MByte Flash
– 6- IMU MPU6886
– Red LED
– Buzzer
– IR transmitter
– 1 Buttons, OLED(1.3 inch), 1 Reset
– 2.4G Antenna:Proant 440
– 95 mAh Lipo Battery
– Extendable Socket
– Grove Port
– Wearable & Wall mounted
– Development Platform UIFlow, MicroPython, for
ESP32 Features
– 240 MHz dual core Tensilica LX6 microcontroller with 600 DMIPS
– Integrated 520 KB SRAM
– Integrated 802.11b/g/n HT40 Wi-Fi transceiver, baseband, stack and LWIP
– Integrated dual mode Bluetooth
– Hall sensor
– 10x capactive touch interface
– 32 kHz crystal oscillator
– PWM/timer input/output available on every GPIO pin
– SDIO master/salve 50MHz
– card interface support
PinMap
RED LED & IR Transmitter & BUTTON A & BUTTON B
ESP32:GPIO10:GPIO9:GPIO37:GPIO39
RED LED:LED PIN
IR Transmitter:Transmitter Pin
Button A:Button Pin
Button B:Button Pin
TFT LCD
Driver IC:ST7735S
Resolution:80 * 160
ESP32:GPIO15:GPIO13:GPIO23:GPIO18:GPIO5
TFT LCD:TFT_MOSI:TFT_CLK:TFT_DC:TFT_RST:TFT_CS
GROVE PORT
ESP32:GPIO33:GPIO32:5V:GND
GROVE port:SCL:SDA:5V:GND
MIC (SPM1423)
ESP32:GPIO0:GPIO34
MICPHONE:SCL:SDA
6- posture sensor (MPU6886) & power management IC (AXP192)
ESP32:GPIO22:GPIO21
6- posture sensor:SCL:SDA
power management IC:SCL:SDA
Power on / off
Power on:Click the reset button
Shutdown:Double the reset button
datasheet
ESP32-PICO
ST7735S
BM8563
MPU6886
AXP192
SPM1423
Example
Comparision Between Different Development Kits of M5
For details click here
Download chart click here
M5StickC facory test code
M5StickC Vending Machine
Description
PowerC HAT is a charging module specially designed for m5stickc, with built-in ip3005 high-precision lithium battery protection IC and ip5209 power management IC. It uses I2C communication protocol to carry out data transmission with m5stickc of the host computer, and can check the voltage, current and other information through programming. The back battery seat of the module can be installed with two 16340 batteries, which can be charged by the charging module, and can also be used as a charging treasure to provide external power through the battery In addition, the module provides an I2C interface for connecting I2C peripherals, a typec interface for power input, a usb-a bus for power output, with a voltage output of 5V / 1.5A and an input voltage of 5V. The module is equipped with an independent switch, which can be opened once and closed twice.
Product Features
Battery testing
power bank
Battery charger
IIC Address 0x75
Weight & Dimension
Dimension:55mm x 35mm
Weight:19g
Package Included
1 x M5StickC
1 x USB Type-C cable
1 x PowerC HAT(include battery 2 * 750mAh)
Additional information
| Weight | 0.105 kg |
|---|
Reviews