Description
TAS5630 Class D amplifiers can be driven under a DC48V 4 ohm load and can provide 300W+300W stereo output power. They use PurePath HD technology and TI advanced closed-loop architecture to realize the next generation of Blue ray home theater systems, stand-alone home theaters, and professional audio systems High-definition media playback and ultra-low distortion.
The board is finished board (excluding support pillars screw below), power can be used, amplifier board itself is absolutely quiet.
Rectifier and filter capacitor, filter capacitor not less than 22000UF otherwise power impure influence ratio. Also potentiometer and other exposed element are preferably connected masking.
Use the AD827 op amp as a preamp, dynamics and excellent detail, the most subtle notes also revealed. Coupled using ELNA brown series capacitor.
Parameters
DC = 50V, R = 4┯, THD + N = 10% time, P = 300W
DC = 50V, R = 6┯, THD + N = 10% time, P = 210W
DC = 50V, R = 8┯, THD + N = 10% time, P = 160W
DC = 50V, R = 4┯, THD + N = 1% time, P = 240W
DC = 50V, R = 6┯, THD + N = 1% time, P = 160W
DC = 50V, R = 8┯, THD + N = 1% time, P = 125W
Total harmonic distortion (THD + N)
Noise ratio (SNR):> 100dB
Input impedance:20K┯
Output offset voltage
Voltage gain:Adjustable
Conversion rate (SR):50V / us
Frequency range:20Hz – 20kHz
Supply range:DC20 – DC50V
PCB size:101.6*98.5mm
Note
The board is a DC power supply, do not enter the exchange directly, use the AC adapter, plug a rectifier bridge and a filter capacitor can be. Also DC power should not exceed 50V, do not lower than 20V, less than 20V will not start. Further output power and supply power relationship, 50V power will be how than 20V
four times larger.
Package Included
1 x TAS5630 power amplifier board
Additional information
| Weight | 0.235 kg |
|---|
Reviews