Description
Users need to bring their own 12V battery for power supply, the welding current is about 90A~150A, and it is easy to weld the common 0.1mm~0.12mm nickel plated sheet. Automatically trigger welding, free the finger.
Specifications
Working voltage:12V-14.6V
Working current:90-150A
Welding mode:automatic trigger
Battery recommendation
20-45ah lead-acid battery with good performance and small internal resistance
3.5-5.5ah 3S model airplane lithium battery pack around 45C
30-35ah capacity 18650 battery pack
(The battery pack that can start the car can basically meet the power supply needs of this circuit)
Steps for Usage
Long press the switch for 1.5 seconds to adjust the power
the indicator light shows
green:low power
blue:medium power
red:high power
Package Included
1x Main Circuit Board
2 x Input Wire
2 x Output Wire(with Welding Pen)
1 x Welding Components Kit
NOTE
If the battery is pretty good and the internal resistance is very low, and then there may be large current overload.
If you are not sure about your battery, it’s better to extend the wire by around 1 meter with 2.52 or 42 wire, then it will reduce the risk of power tube burnt.
Additional information
| Weight | 0.168 kg |
|---|
Reviews