Descriptions
Channel:2 CH 2 channel work way
Decode:Learning code
Working Voltage:DC 12V
Output way:Momentary defaults ,(other model can change by yourself in work pin)
Maximum Load Current:10A
Relay load:10A 220/110V
Receiver Sensitivity:-105dBm
Working temperature:-40’C – +80’C
Size:68mm x 48mm x 15mm
Working Model /output way(change method)
The Work model can change in the switch board work pin.(1.Jog/momentray:All Model-pin not connector. 2.Self -lock/Self-Latched:Model (pin1+Pin 2) Connector Or (Pin2+pin 3) connector.3 Inter-lock /Latched:(Pin2+pin 3) Or (Pin1+Pin2) Connector)
1. Jog/momentray:Press one button is Working /ON. Loosen your finger on the same button is Stop/OFF. One channel switch need one buttons remote control.
2.Self -lock/Self-Latched:Press one button for one time is working/ON. Press the same button again is stop/OFF. One channel switch need one buttons remote control.
3.Inter-lock /Latched:Press one button is working/ON, press another button is stop/OFF. One channel switch need 2 buttons remote control.
Add remote control method
1. Connector the switch to 12V…
2. press the switch board learn button (1-3 second),till the switch LED lighting..
3. after press the remote control button(A.B), till the switch LED lighting.. the relay will be ON or OFF.
4. test the controller control the switch.. press the control button, the relay will be on and off.. you can hear it.
Remove Remote control
1. Connector the switch to 12V ..
2. Press the learning button for about 8 seconds, the indicator light turns on to off, then the code you learned before will be deleted.The remote controller can not control the switch relay.
Package Included
1 x 2 Channel RF Wireless System Remote Control Switch with Shell
Additional information
Weight | 0.061 kg |
---|
Reviews