Documents
Manual:Click here to open
Schematic:Click here to open
Overview
This is an E-Ink display HAT for Raspberry Pi, 9.7inch, 1200×825 resolution, with embedded controller IT8951, communicating via USB/SPI/I80 interface, supports partial refresh.
Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
Features
No backlight, keeps displaying last content for a long time even when power down
Low power consumption, basically power is only required for refreshing
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
USB/SPI/I80 interface, for connecting with host boards like Raspberry Pi/Nucleo, etc.
Comes with development resources and manual (examples for Raspberry Pi/STM32)
Specifications
Operating voltage:5V
Interface:USB/SPI/I80
Outline dimension:218.8mm ≠ 156.425mm ≠ 1.15mm
Display size:202.8mm ≠ 139.425mm
Dot pitch:0.169 ≠ 0.169
Resolution:1200 ≠ 825
Display color:black, white
Gray scale:2-16 (1-4 bit)
Full refresh time
Total refresh power:0.6W(typ.)
Total standby power:0.3W(typ.)
Viewing angle:>170
SPI Pinouts
SYMBOL:DESCRIPTION
5V:Power input
GND:Ground
MISO:SPI MISO pin
M0SI:SPI M0SI pin
SCK:SPI SCK pin
CS:SPI chip selection, low active
RST:External reset, low active
HRDY:Busy status output, low active
e-Paper IT8951 Driver HAT Dimensions
Package includes
Note:the Raspberry Pi is not includes
1 x 9.7inch e-Paper
1 x e-Paper IT8951 Driver HAT
1 x 9.7inch e-Paper Adapter
1 x 33PIN FFC (same side contact)
1 x USB type A plug to micro B plug cable
1 x PH2.0 20cm 8Pin
1 x RPi screws pack (2pcs)
Additional information
| Weight | 0.529 kg |
|---|
Reviews