Documents
Manual:Click here to open
Schematic:Click here to open
Code:Click here to open
SSD1351 Datasheet:Click here to open
UG-2828GDEDF11 Datasheet:Click here to open
Overview
This is a general RGB OLED display Module, 1.5inch diagonal, 128×128 pixels, 16-bit high color (65K colors), with embedded controller, communicating via SPI interface.
Features
128×128 high resolution, 65K colors, clearly displays colorful images
Supports 4-wire SPI OR 3-wire SPI interface, configured via onboard resistor
Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
Specifications
Driver:SSD1351
Interface:4-wire SPI, 3-wire SPI
Display color:RGB, 65K colors
Resolution:128×128
Viewing angle:>160
Operating voltage:3.3V / 5V
Dimension:44.5 x 37 (mm)
Interface
SYMBOL
DESCRIPTION
VCC
Power (3.3~5V input)
GND
Ground
DIN
Data input
CLK
Clock data input
CS
Chip selection, low active
DC
4-wire SPI:Data/Command selection (high for data, low for command)
3-wire SPI:Connects to GND, keeps low
RST
Reset, low active
There are two available drive interfaces for this RGB OLED module:4-wire SPI (default) and 3-wire SPI
BS
DC
4-wire SPI
0
DC
3-wire SPI
1
Connects to GND
Package includes
1 x 1.5inch RGB OLED Module
Additional information
| Weight | 0.027 kg |
|---|
Reviews