Documents
Sample tutorial:Click here to open
Features
Support wide voltage range input (DC 24V~60V)
Support 16 steps and subdivision settings, the resolution can reach 12000 pulses/revolution
Support 16 gear drive current settings, adjustable from 1.2A/phase to 6.0A/phase
Support three control methods:common cathode, common anode, and differential
Support undervoltage, overvoltage, overheat, overcurrent alarm
Support power-down phase memory function
Both I/O signal and input signal are optically isolated
When the step pulse stops for more than 100ms, the coil current is automatically reduced to half of the set current
Provide complete supporting information manual (provide Raspberry Pi, STM32, Arduin example)
Parameter
Working voltage:DC 24V ~ 60V
Signal voltage:4.2V ~ 24V
Drive current:1.2A ~ 6A
Signal frequency:150KHz
Control mode:common cathode, common anode, differential
Model
Phase
Supply voltage (V)
Settable current (A)
Dimensions (mm)
Equivalent power (W)
Applicable motor
SMD356C
Three-phase
DC 24~60
Im1.2~6.0/Ip1.7~8.4
118≠76≠34
80~100
57 Series
Use
Engraving machine, glue dispenser, screw machine, cutting machine and other high-resolution medium and small CNC equipment
PIN:Description
PU+:Pulse signal photoelectric isolation positive terminal
PU-:Pulse signal photoelectric isolation negative terminal
DR+:Direction signal photoelectric isolation positive terminal
DR-:Direction signal photoelectric isolation negative terminal
MF+:Photoelectric isolation positive terminal of motor enable signal
MF-:Motor enable signal photoelectric isolation negative terminal
U:Three-phase stepper motor U terminal
V:Three-phase stepper motor V terminal
W:Three-phase stepper motor W terminal
NC:No connect
DC+:24~60V power input
DC-:Power ground
PU+/PU-:For pulse signal control, a pulse motor takes one step, and the pulse width must be >2.5us;
DR+/DR-:direction signal control;
MF+/MF-:It is the motor enable signal control;
There are three wiring methods:common cathode, common anode, and differential
Common cathode:PU-, DR-, MF- are grounded, PU+, DR+, MF+ are connected to control pins, high level is effective
Common anode:PU+, DR+, MF+ are connected to 5~24V, PU-, DR-, MF- are connected to control pins, low level is active
Difference:It can be combined in two ways:common cathode and common anode;
Note:It is recommended to use common cathode connection
Package includes
1 x Motor driver
Additional information
| Weight | 0.1 kg |
|---|
Reviews