Feature
– Operating voltage:DC 4.5 – 30V
– Measure voltage:DC 0 – 100V
– Minimum resolution(V):0.1V
– Measure current:50A (require external shunt)
– Minimum resolution(A):0.1A
– Operating current
– Display:three 0.28inch LED digital tube
– Display color:Red and Blue (two-color display)
– Dimensions:48 x 29 x 21mm
– Mounting cutout:45.5 x 26.5mm
– Refresh rate:about 500mS / times
– Measure accuracy:1% (± 1 digit)
– Operating temperature:-10 to 65°c
– Operating Humidity:10 to 80% (non-condensing)
– Working pressure:80 to 106 kPa
– Applications:Suitable for automotive/electric cars/motorcycles battery monitoring or other products voltage current measurement
– Wiring
Black line (thin):vacant or buck circuit (module) negative
Red line (thin):power supply+
Black line (thick):COM, common measuring
Red line (thick):PW+, measuring terminal voltage input positive
Yellow line (thick):IN+, current input+
Notice
– The voltage between the thin red and thin black lines must be within DC 4.5-30V
– The ammeter can only be connected to the negative of the device under test
– Exceeds 5A, long-term full load working continuously, it is recommended that the measurement side of the leads are directly soldered to the socket
– When the black thin line vacant, it is better to use insulating tape around the exposed part of the wire, to prevent short circuits
– If just be used as a voltmeter, it is recommended that the yellow line and the black line were connected together, to prevent the ammeter digital
flashing
Package included
10 x Digital Volt Amp Meter
10 x 50A / 75mV DC Current Shunt
Additional information
| Weight | 0.9 kg |
|---|
Reviews