Feature
1. Complete 802.1 1b/g/n WIFI SOC module
2. Built-in Tensilica L106 ultra-low power consumption 32-bit micro MCU, main frequency supports 80 MHz and 160 MHz, supports RTOS
3. Support GPI0/PWM interface
4. Built-in Flash
5. Adopt DIP-16 package
6. Integrated Wi-Fi MAC/BB/RF/PA/LNA
7. Support multiple sleep modes
8. Embedded Lwip protocol cable
9. Support STA/AP/STA+AP working mode
10. Support Android, IOS Smart Config (APP)/Airkiss (WeChat) one-click network configuration
11. Support remote firmware upgrade (F0TA)
12. General AT commands can be used quickly
13. Support secondary development, integrated Windows, Linux development environment
Model:ESP-01:ESP-01D (This item):ESP-01F:ESP-01M:ESP-01S:ESP-07
Letter of agreement:Complete 802.11b/g/n WiFi SoC module
Working frequency:2400-2483.5MHz
Chip scheme:ESP8266:ESP8285:ESP8285:ESP8285:ESP8266:ESP8266
Antenna form:Onboard antenna:External antenna:External antenna:Onboard antenna:Onboard antenna:IPEX seat/ceramic antenna
Package form:DIP-8:DIP-6:SMD-18:DIP-18:DIP-8:SMD-16
Size(mm):24.7*14.4*11.0:13.5*8.5*2.6:11.0*10.0*2.0:18.0*18.0*2.8:24.4*14.4*11.2:21.2*16.0*3.0
Serial port rate:4Mbps:4Mbps:4Mbps:4Mbps:4Mbps:4Mbps
Transmission distance:50 meters:40 meters:50 meters:40 meters:50 meters:50 meters
Supply voltage:Power supply voltage 3.0-3.6V, typical value 3.3V
SPI Flash:8Mbit:16Mbit:8Mbit/16Mbit:8Mbit/16Mbit:8Mbit:8Mbit
IO port:2:3:9:11:2:9
Module certification:NO:NO:FCC/CE:FCC/CE/SRRC/REACH/RoHs:ROHS:NO
Modem Sleep:20mA:20mA:20mA:20mA:20mA:20mA
Light Sleep:2mA:2mA:2mA:2mA:2mA:2mA
Deep Sleep:20uA:20uA:20uA:20uA:20uA:20uA
Module model:ESP-01D
Package:DIP-6
size:13.5*8.5*2.6(÷0.2)MM
Antenna form:External
Spectrum range:2400~2483. 5MHz
Operating temperature:-20C~70 C
Storage environment:-40 C~125 C,
Power supply range:Supply voltage 3.0V~3.6V, supply current >500mA
Support interface:GPIO/PWM
IO port number Dong:3
Serial port rate:Support 110 ~4608000 bps, the default is 115200 bps
safety:WEP/WPA-PSK/WPA2-PSK
SPI Flash:16Mbit (built-in chip)
PIN:NAME:Function Description
1:ANT:RF antenna interface, external antenna is required
2:IO12:GPIO12
3:IO4:GPIO4
4:VDD:3.3V power supply; the output current of the power supply is recommended to be above 500mA
5:IO14:GPI014
6:GND:Grounded
Package includes
1 x ESP-01D
Additional information
| Weight | 0.01 kg |
|---|
Reviews