5pcs 7Pin 0.96 inch OLED Display 12864 SSD1306 SPI IIC Serial LCD Screen Module

Feature
Control chip:SSD1306
Display area:21.744 x 10864mm
Physical size:27.3 x 27.8mm
Interface type:Default 4-wire SPI
Switchable rear resistor to use 3-wire SPI, IIC interfaces
Number of pins:7
Display color:yellow blue
Working temperature:-40~70°C
Net weight:5g
Interface definition
1> GND (Power ground)
2> VCC (Power + 3.3-5V)
3> D0 (SPI clock line for SPI interface and IIC clock line for IIC interface)
4> D1 (SPI data line for SPI interface and IIC data line for IIC interface)
5> RES (OLED reset, OLED needs to be reset once after power-on)
6> DC (SPI data/command selection pin, used to set IIC address when IIC interface)
7> CS (OLED SPI chip select, active low, if you do not want to use must be grounded)
Package includes
5 x 0.96 Inch OLED Display Module
Wiring method
Wiring 1
MCU hardware SPI connection method
If there is only one device on the SPI bus, you can directly ground the CS of the OLED screen, which saves an IO.
Wiring 2
MCU IO analog SPI connection mode
If there is only one device on the SPI bus, you can directly ground the CS of the OLED screen, which saves an IO.
Wiring 3
MCU analog IIC connection method
IIC address
DC is low = 0x78
DC is high = 0x7A
Generally DC grounding
Wiring 4
MCU hardware IIC connection method
IIC address
DC is low = 0x78
DC is high = 0x7A
Generally DC grounding
As below pictures show:

Additional information