Features
The multi-function four-way remote control switch of wide-voltage switching power supply adopts 10A relay, which can load large power appliances; learning single chip decoding can learn multiple remote controllers; simple and flexible operation; output mode can be selected and used conveniently by jumping switch, point-switching, self-locking and interlocking, and it is suitable for many applications in many fields; reserve data bit output adjustment port, which can pass through. It is convenient for customers to choose the corresponding key position values of remote controllers at different locations, and avoid the embarrassment that the old fixed key position can only be matched with a single type of remote controller. Output band voltage, easy to install.
Specification
Model:AK-RK04S-220
Operating Voltage:AC85-250V
Working frequency:433 MHz
Remote control distance:10-30 meters
Remote battery:L1028 23A 12V
Standby Current:10mA
Load:less than 1000 watts
Working mode:self-locking, jog and interlocking
Size:105 x 65 x 25mm
Learing method
Turn on the 220V power supply, press and hold the learning button for three seconds, then press any button on the remote control. The indicator flashes, indicating that the learning is successful.
Note:This controller can learn the fixed code (PT2262, SC2260 chip, etc.) / learning code (EV1527, HS2240, etc.) 20 different encoding, any button remote control, beyond it will remove the earliest learned remote control.
Clear method
Press and hold the learning button for about 8 seconds. The indicator will turn off and return to light.
Work mode switching
Use the pin on the remote control switch to use the short circuit connection 1, 2, 3 to switch the working mode.
1. Jog – 1, 2, 3 short circuit vacant, no connection
2. Interlock – short 1, 2
3. Self-locking – short 2, 3
The meaning of self-locking/interlocking/jogging
Interlock:Press the corresponding button of the remote control, the corresponding relay is turned on, and then press another remote control button; the relay is disconnected.
Non-lock, jog:Press the remote control button, the corresponding relay is turned on, release the remote control button; the corresponding relay is disconnected.
Self-locking:Press the remote control button once, the relay is turned on, press the remote control button again, the relay is disconnected.
Package included
1 x 433 MHz Intelligent Wireless Remote Control Switch
2 x Remote with battery
Wiring diagram for controlling AC220V load
If the control lamp type receiving board generally selects the self-locking working mode, the relays work independently and do not interfere with each other. Press the remote control button to pull the corresponding relay. If you press the A button once, it will be turned on. Press the A button again to turn it off, B, C, D. Similarly, the four channels can be switched on and off independently. The operation of each key will only be effective for the corresponding relay. It will not affect other relays. It can remotely control 4 channels at the same time. It is recommended that the power of each channel should not exceed 200W.
Control DC12V voltage wiring diagram
If you need to control other voltages, just change the DC12V in the figure below to other voltages. If you control the lamp type load receiving board, you should choose the self-locking working mode.
Remote control modification of garage door and electric door
The receiving board generally selects the non-locking (jog) working mode. The ordinary electric door has three manual buttons of “open, close and stop Inch, and the three buttons of the remote control control three pairs of three relays of the remote receiving board, three The docking points are respectively connected to the inchon, off, stopinch manual button. This product is a four-way remote control receiver board, only need to use three of them, the extra one can be used or used as a spare.
Remote control modification of the speed control position switch of the electric fan
The receiving board generally chooses the interlocking working mode, and the interlocking mode is that the relays alternately pull in. If you press the A button, A is turned on and the lock is always on, then press the B button to turn off A, B is turned on and the lock is always on, the C button, D button and so on, four interlocks, only one way Pass; here press the D button, which is the fourth way for the stop button. At this time, no matter which way the ABC is connected before, press the D button, the previous switch will be disconnected to achieve the stop function.
Additional information
| Weight | 0.184 kg |
|---|
Reviews