LILYGO TTGO LORA32 915Mhz SX1276 ESP32 OLED Display bluetooth WIFI Lora Development Module Board

If you need the 868mhz version, please buy Product ID:1248652
Description
The 915MHz antenna needs to be in connection with the IPEX interface (if the antenna is not connected, it may damage the LoRa chip)
Lithium battery charge and discharge circuit, when the battery is full, the blue LED will stop working. When using, pay attention to the positive and negative of the battery, otherwise it will be damaged!With IO port touch screen touch signal input, you need to add the 100nF pull-down capacitor to this pin!
Example
This product is a SX1276 chip based on ESP32 WIFI increased OLED, namely LoRa remote modem, 915MHz frequency, high sensitivity is over-148dBm, + 20dBm output power, high reliability, long transmission distance.
the onboard 32MB Flash wi-fi antenna, 0.96 inch blue oled display, lithium battery charging circuit, CP2102 interface and USB serial chip, the perfect support for development environment, can be used for program checking and product development is very easy and fast.
Operating voltage:3.3V to 7V
Operating temperature range:-40 ° C to + 90 ° C
Support for Sniffer software protocol analysis, Station, SoftAP, and Wi-Fi Direct modes
Data rates:150 Mbps @ 11n HT40., 72 Mbps @ 11n HT20, 54 Mbps @ 11g, 11 Mbps @ 11b
transmit power:19.5 dBm @ 11b, 16.5 dBm @ 11g, 15.5 dBm @ 11n
receiver sensitivity up to -98 dBm
UDP sustained throughput of 135 Mbps
Pin diagram
Test details
Use legend
Package included
1 x Wemos® TTGO LORA32 915Mhz SX1276 ESP32
1 x 915nhz Spring Antenna
1 x Line
2 x Pin
For example One
(1) 915MhzOLED LoRaSender
include
include
include
include inchSSD1306.hinch
include inchimages.hinch
define SCK 5 // GPIO5 – SX1278’s SCK
define MISO 19 // GPIO19 – SX1278’s MISO
define MOSI 27 // GPIO27 – SX1278’s MOSI
define SS 18 // GPIO18 – SX1278’s CS
define RST 14 // GPIO14 – SX1278’s RESET
define DI0 26 // GPIO26 – SX1278’s IRQ (interrupt request)
define BAND 868E6 // 915E6
unsigned int counter = 0;
SSD1306 display (0x3c, 4, 15);
String rssi = inchRSSI -inch;
String packSize = inch-inch;
String packet;
void setup ()
//LoRa.onReceive(cbk);
// LoRa.receive ();
Serial.println (inchinit okinch);
display.init ();
display.flipScreenVertically ();
display.setFont (ArialMT_Plain_10);
delay (1500);
}
void loop ()
(2) 868mhz / 915Mhz OLED LoRaSender
include
include
include
include inchSSD1306.hinch
include inchimages.hinch
define SCK 5 // GPIO5 – SX1278’s SCK
define MISO 19 // GPIO19 – SX1278’s MISO
define MOSI 27 // GPIO27 – SX1278’s MOSI
define SS 18 // GPIO18 – SX1278’s CS
define RST 14 // GPIO14 – SX1278’s RESET
define DI0 26 // GPIO26 – SX1278’s IRQ (interrupt request)
define BAND 868E6 // 915E6
SSD1306 display (0x3c, 4, 15);
String rssi = inchRSSI -inch;
String packSize = inch-inch;
String packet;
void loraData ()
void cbk (int packetSize)
void setup ()
//LoRa.onReceive(cbk);
LoRa.receive ();
Serial.println (inchinit okinch);
display.init ();
display.flipScreenVertically ();
display.setFont (ArialMT_Plain_10);
delay (1500);
}
void loop ()
delay (10);
}

Additional information