Instruction
13.3inch E-Paper E-Ink Display HAT For Raspberry Pi, 1600≠1200 Pixels, Black / White, 2-16 Grey Scales, USB/SPI/I80
Partial Refresh Support, Low Power, Wide Viewing Angle, Paper-Like Effect
Ideal for e-reader, eink monitor, industrial instruments…
Features At A Glance
No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
USB/SPI/I80 interface, for connecting with controller boards like Raspberry Pi/STM32, etc.
Specifications
OPERATING VOLTAGE:5V:DISPLAY COLOR:Black, white
INTERFACE:USB/SPI/I80:GREY SCALE:2-16 (1-4 bit)
OUTLINE DIMENSIONS:285.80 ≠ 213.65mm:FULL REFRESH TIME
DISPLAY SIZE:270.40 ≠ 202.80mm:REFRESH POWER:1.2W (typ.)
DOT PITCH:0.169 ≠ 0.169mm:STANDBY CURRENT
RESOLUTION:1600 ≠ 1200 pixels:VIEWING ANGLE:>170
Package includes
1 x 13.3inch e-Paper
1 x e-Paper IT8951 Driver HAT
1 x 13.3inch e-Paper Adapter
1 x 33PIN FFC (same side contact)
1 x USB type A plug to micro B plug cable
1 x PH2.0 20cm 8Pin
1 x RPi screws pack (2pcs)
NOTE:Raspberry Pi in the photo is NOT included.
SPI PINOUT
5V:Power, 5V input
GND:Ground
MISO:SPI MISO pin
MOSI:SPI MOSI pin
SCK:SPI SCK pin
CS:SPI chip selection, low active
RST:External reset, low active
HRDY:Busy status output, low active
Additional information
| Weight | 1.4 kg |
|---|
Reviews