Introduction
This waterproof temperature sensor kit is using the same probe――DS18B20 probe AS . It contains a probe with a resister module. So it is easy to connect on the board for Arduino.
The DS18B20 temperature sensor provides 9 to 12-bit (configurable) temperature readings over a 1-Wire interface, so that only one wire (and ground) needs to be connected from a central microprocessor. Compatible with 3.0-5.5V systems.
Specification
Operating voltage:3.0~ 5.5V
÷0.5C Accuracy from -10C to +85C
Usable temperature range:-55 to 125C (-67F to +257F)
9 to 12 bit selectable resolution
Uses 1-Wire interface- requires only one digital pin for communication
Unique 64 bit ID burned into chip
Multiple sensors can share one pin
Temperature-limit alarm system
Query time is less than 750ms
3 wires interface
Type A
Red wire – VCC
Black wire – GND
Yellow wire – DATA
Type B (Recently there’s a series of sensors using this pin mapping. Sorry for the inconvenience.)
Red wire – VCC
Yellow wire – GND
Green wire – DATA
Stainless steel tube 6mm diameter by 35mm long
Cable diameter:4mm
Length:90cm
Package includes
1 x Waterproof DS18B20 Digital temperature sensor
1 x Terminal sensor adapter
1 x Digital sensor cable
Additional information
| Weight | 0.0326 kg |
|---|
Reviews