Note:There is no temperature control function.
Product features and functions
1. Adopt one-piece metal shell design, convenient to use and carry, and good heat dissipation;
2. Integrated power supply to avoid complicated wiring;
3. The heating ring is wrapped with high temperature heat insulation material to prevent short circuits during the heating process, and the heating ring can be detached and replaced to customize a specific heating ring;
4. Integrated internal water cooling circulation system to prevent overheating of the heating ring; (water cooling through the water pipe)
5. Two high-power fans at the top for heat dissipation;
6. Add a digital current overload protection switch, once overloaded, trip the protection circuit in time;
7. The large LCD screen displays the various operating parameters of the system, including voltage, current, power, motherboard temperature, etc., and can be easily switched between Chinese and English with one key. The maximum allowable current can be set by the power meter, and the maximum operating current will be immediately exceeded during work Enter the overload protection mode.
8. Metal button switch and foot control are added, which is convenient for different scenes.
9. The water cooling system is protected against water shortage.
Product parameters
1. Dimensions:length, width and height 380*140*210 (unit:mm);
2. Heating ring size:70*60*73 or 80*70*73 (inner diameter * outer diameter * height);
3. Input voltage:AC110-AC220V 18A; (the power is halved when 110V is input);
4. DC working voltage:53.5V or 48V (the internal power supply voltage is the display voltage);
5. Maximum DC working current:80A;
6. The maximum temperature for direct heating of metal iron with a diameter of 20mm is 1200 degrees Celsius, and the maximum temperature for heating iron with a standard 60mm diameter heating ring is about 1000 degrees Celsius;
7. The maximum temperature of the crucible is 1600 degrees Celsius, which can melts iron, gold, silver, aluminum, copper and other metals;
8. Package weight:9KG;
9. The net weight of the host:6.3KG;
10. Packing size:48cm*24cm*42cm;
Precautions
1. Turn on the main power switch on the back first, wait for a few seconds to see that the fan and water pump are working normally, and then check that the voltage and voltage display are about 48V or 53.5 before turning on the induction heating switch on the panel. Do not make mistakes , Otherwise it will burn the motherboard directly and without protection. When shutting down, turn off the heating switch first, and then turn off the main power switch. If it is not in use for a period of time, turn off the main power supply after turning off the heating switch for one minute to allow the cooling system to cool the system and increase its service life;
2. When working, water cooling and air cooling must work at the same time. If any of them does not work, you should immediately disconnect the power supply and contact the manufacturer for solutions;
3. If water cooling is possible, the cold water can be directly discharged without circulating the hot water, so that the heat dissipation effect is better;
4. For long-term use of crucibles, more crucibles should be prepared. High temperature heating of graphite will react with oxygen to generate carbon dioxide and gradually consume crucibles;
5. When using, always pay attention to the changes of the various parameters of the display, especially the voltage, current and the temperature of the main board. Once the abnormality exceeds 75 degrees Celsius, the power must be disconnected immediately.
6. When using high power, it is a normal phenomenon that the working noise of the cooling system will be relatively large.
Package includes
1 x Power supply
1 x Foot switch
1 x Power plug (CN only)
1 x Copper tube
Additional information
| Weight | 0.0085 kg |
|---|
Reviews