Overview
This is an E-Ink raw display, 1.02inch, 128≠80 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.
Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
Features
No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
Comes with development resources and manual (driver board schematic, examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
Specifications
Operating voltage:3.3V
Interface:3-wire SPI, 4-wire SPI
Outline dimension:32.6mm ≠ 18.6mm
Display size:21.76mm ≠ 14mm
Dot pitch:0.175 ≠ 0.17
Resolution:128 ≠ 80
Display color:black, white
Grey scale:2
Full refresh time:2s
Refresh power:26.4mW(typ.)
Standby power
Viewing angle:>170
PIN Function
VCC:3.3V/5V power input
GND:power ground
DIN:SPI communication M0SI pin
CLK:SPI communication SCK pin
CS:SPI chip select pin (active low)
DC:data/command control pin (high level indicates data, low level indicates command)
RST:External reset pin (low level reset)
BUSY:Busy output pin (means low level busy)
Documents
Schematic:Click here to open
Instruction:Click here to open
Sample tutorial:Click here to open
Github:Click here to open
Package includes
Bareboard
1 x Display board
With driver board
1 x 1.02inch display
1 x 8pin dupont cable
Additional information
| Weight | 0.1 kg |
|---|
Reviews