Product Upgrade Content
1. Pin GPIO34 pin is replaced with GPIO35
2. Replace the charging IC (TP5400) with the power management AXP192
3. GPS TX, RX pin replacement
4. Power on and remove, replace with button to open
5. Reduced sleep current
6. GPS battery replacement
ESP32
-Lastest ESP32 Version:REV1
-WIFI
-bluetooth
-4MB Flash
-4MB PSRAM
-3D Antenna
LORA
Product Description
Working voltage:1.8~3.7V
Acceptable current:10~14mA
Transmit current:120mA@+20dBm
90mA@+17dBm
29mA@+13dBm
Operating frequency:433/470MHz(433HMz version) /868M/915M(868MHz version) (Optional)
Transmit power:+20dBm
Receive sensitivity:-139dBm@LoRa &62.5Khz&SF=12&146bps
-136dBm@LoRa &125Khz&SF=12&293bps
-118dBm@LoRa &125Khz&SF=6&9380bps
-123dBm@FSK&5Khz&1.2Kbps
Frequency error:+/-15KHz
FIFO space:64Byte
Data rate:1.2K~300Kbps@FSK
0.018K~37.5Kbps@LoRa
Modulation Mode:FSK,GFSK,MSK,GMSK,LoRa TM, OOK
Interface form:SPI
Sleep current:0.2uA@SLEEP
1.5uA@IDLE
Operating temperature:-40→- +85→
Digital RSSI function
Automatic frequency correction
Automatic gain control
RF wake-up function
Low voltage detection and temperature sensor
Fast wake-up and frequency hopping
Highly configurable data packet handler
GPS
GPS modules NEO-M8N, 3V-5V power supply Universal
Destined module with ceramic antenna, signal super
Save the configuration parameter data EEPROM Down
With data backup battery
There are LED signal indicator
Default Baud Rate:9600
Power
IP5306
2A Battery Management
LED indicator:There are 4 LEDs show the battery status in real time.
Power button:Click one time will start. Fast click 2 times will shut down.
USB
CP2104-GMR
Note
This product does not include the battery.
https://github.com/LilyGO/TTGO-T-Beam
SD card test program:https://github.com/LilyGO/TTGO-SD-test
Package includes
1 x WiFi Wireless bluetooth Module
1 x Antenna2 x Pin
Product Demonstration
With OLED (Not includes)
With BMP280 (Not includes)
Additional information
| Weight | 0.05 kg |
|---|
Reviews