Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Instruction
VEML6035 is a 16-bit low-power, high-sensitivity CMOS operating ambient light sensor through simple I2C commands. The sensor has an active interrupt function. Trigger to remove the load on the host outside the threshold window setting. The average active power consumption is about 300uW.
VEML6035 includes a photodiode, amplifier and analog / digital circuit in a single chip. The sensor has excellent temperature compensation ability to keep the output stable under temperature changes and its refresh rate setting does not require external RC low recitation filtering. There is a programmable shutdown mode to reduce the current consumption to 0.5uA.
Parameters
Working voltage:1.7 ~ 3.6V (recommended 3.3V)
Communication connection:12C connection (up to 400KHz)
Operating temperature:-25 ~ 85 →
Resolution:16 bits
Flicker noise suppression:100Hz and 120Hz
Lens transmittance:0.0004 lux / bit
Pin Description
VCC:Power supply is positive
GND:Ground
INT:Interrupt pin
SCL:I2C serial clock line
SDA:I2C serial data line
Functional block diagram
Typical application circuit
VEML6035 has a fixed slave address for host programming and access selection. The predefined 7-bit I2C bus address is set to 0100001 = 0x29. The least significant bit (LSB) defines the read or write mode. Correspondingly set the bus address and 01010010 = 52h when writing, 01010011 = 53h when reading. Module C has a pull-up resistor, so the user does not need to pull it up again.
Schematic diagram
Package includes
1 x Sensor module with pin
Additional information
| Weight | 0.003 kg |
|---|
Reviews