Specifications
Control humidity range:1%RH-99%RH
Load power:10A/DC24V
Humidity measurement range:1% RH-999% RH
Measurement error:±3% RH (good environment temperature is 25→)
Control humidity accuracy:1% RH display:1% RH
Humidity return:adjustable between 1-50% RH
Supply voltage:DC24V
Output type:10A relay output
Probe type:humidity resistance sensor
Size:48*29*22mm
Installation hole:46*27m
Moisture control object:dehumidification or humidification
Probe line length:1.5m line length
Working environment:humidity 90% RH no frosting
Parameter Code and Settings
CodeDescriptionrangeFactory settings
P0Humidification/dehumidificationH/CC
P1Backlash1-50%RH
P2Set the maximum limit9995
P3Set the minimum limit15
P4Temperature correction-1010
P5Delayed start0-101
P6Restore Factory settingsON- OFFOFF
Setting Instructions
1.Connect the power supply and load to power the controller. The red color above shows the humidity, blue below is displayed as the desired humidity
2. Press STG (+) ENT (-) to set the required humidity,After the setting is completed, wait for 3 seconds to automatically confirm the return. At this time, the controller automatically performs relay energization according to the setting.
3. Press and hold SET for 5 seconds to enter the main menu settings, press SET (+) ENT (-) to switch P0-P8, when adjusting parameters P0-P8 parameters
4. If you need to adjust P0, press SET button (+) ENT (-) at the same time, adjust 0K, then control SET (+) ENT (-)
Note:For 10A relays, to meet high power loads, please make sure the line is correct.
Indicator Description
Indicator light:off means the relay is off, steady light means the relay is closed
Digital tube:The above shows that LL is the sensor open circuit, indicating that HH is out of the measurement range, the humidity will forcibly open the relay.
Package Included
1 x W2026C DC 24V 10A Digital Hygrometer Humidity Meter
Additional information
| Weight | 0.086 kg |
|---|
Reviews