Features
1. Spot Compressed Ultra-thin Focus Laser
– The latest 5.5W LD+FAC spot compression laser has an ultra-fine 0.08mm square laser focus, which is 2 times thinners than ordinary lasers and has a higher energy density. In the comparison of the cutting effect of wood/acrylic , the LD+FAC laser engraving traces are thinners, and the cutting penetration of the laser is stronger.
2. New Eye Protection Design
– The laser filter cover filters 98% of the ultraviolet light to eye, You and the people around you can watch laser engraving without wearing goggles. The cover also prevents animals grabing the laser spot.
3. Fast Focusing Design
– S6 Pro combined fixed focus laser and sliding design . You only need to slide the laser and tighten the screw to complete the focusing.
4. Solid and Quick Assembly Structure Design
– The all-metal structure design makes the machine more solid, and improve the accuracy of engraving. The whole structure is designed for quick installation, it usually takes 10-20 minutes to finish installation.
5. Widely Compatibility
– The machine works well with various engraving software, such as LaserGRBL, LightBurn, Benbox, GrblController, LiteFire, supports PWM mode engraving, supports Windows/MAC system, engraving file supports JPG, PNG, DXF, SVG, G-code, NC, BMP, etc.
6. Square Measuring Ruler Axis
– X-Y-axis contain precise scale lines, which is convenient for you to measure the size of engraving objects . The 410x420mm large engraving area can meet various engraving needs.
7.Safety Design
– There is a power switch on the machine for emergency power off. Fixing holes are reserved on the four feet and the body to fixi the machine and the data cable.
Specification
Product ModelSCULPFUN S6 Pro
Engraving Size410*420mm
Engraving Materialswood, paper, cardboard, plastic, white, PCB board, aluminum oxide, black-painted metal/ceramic
Cutting Materialcardboard, fabric, wood board, bamboo, acrylic, plastic board;
Total Machine Power20-30W
Laser Output Optical Power5.5-6W
Laser Wave Length 455±5nm
Engraving Accuracy0.01mm
Focusing Methodfixed focus laser + sliding device
Laser Protective CoverThe light filter cover on the laser protects the user’s eyes and prevents animals grabing the laser spot.
Operating SoftwareLaserGRBL, LightBurn, LaserGRBL, LightBurn, Benbox, GrblController, LiteFire, Support Windows system, Support OSMAC system. Supported file formats NC, BMP, JPG, PNG, DXF and other image formats.
Data Transmission Method USB connection
Power SupplyInternational universal standard. power input:100-240V AC, 50/60HZ output:12V 5A
Equipment Net Weight3.0kg
Package Weight4.4kg
Packing Size615*345*130mm
CertificationCE FCC RoHS FDA
Note
For detailed machine instructions, please refer to the manual for parameter settings.
When operating the laser engraving machine, please install the laser protective cover. If it is not installed, you need to wear goggles.
Please do not touch the laser emitter with your hand, or it may burn your hand.
Please avoid strong impact on the machine.
Children under 14 are not allowed to use this product and children over 14 need adult supervision.
The light engraving machine can not be directly applied to any mirror reflecting object, which may cause injury to the operator or burn the laser.
Package Included
S6 Pro Engraving Machine Packing List
1*X Axis Assembly
2*X Shaft
2*Y Shaft
1*Control Box Module Set
3*Support Feet
1*Laser Module Set
1*12V 5A Power Adapter
1*Power Adapter
1*USB Cable
Step 1~5 Screw Installation Package
2*Belt
1*T-shaped M5 Screwdriver
1*L-shaped M4 Screwdriver
1*L-shaped M3 Screwdriver
10*Tie
1*8-10mm Nut Wrench
1*Brush
1*Laser Goggles
2*10x10cm Wood Chip 3mm Thickness
1*A4 Size Steel Desktop Protection Pad
Additional information
| Weight | 0.00506 kg |
|---|
Reviews