MPPT Solar Boost Controller Battery 24V~88V Boost 0-10A Solar Panel Charger Regulator
Features
1. MPPT maximum power tracking boost charger, maximum MPPT efficiency 98%
2. The system is powered by solar panels
3. Anti-overcharge, anti-overcurrent (10A), anti-backflow, short-circuit protection, temperature protection (over 90℃, intelligently reduce charging current)
4. Use three-shift switch + fine-tuning settings to support lead-acid batteries, lithium iron phosphate batteries, ternary lithium batteries, battery pack charging voltage
5. The system is abnormal, one-key reset and restart
7. Intelligent tracking of sunlight intensity-MPPT maximum power tracking
Scope of application
This controller is only suitable for battery packs with solar panels 12V to 50V input and output charging voltage:48V 60V 72V. The battery pack is liquid open or sealed
Lead-acid battery pack and lithium iron phosphate battery or lithium battery.
Specification
Material:Aluminum alloy
Color:Silver
Input voltage:DC12-50V
Output voltage:24-88V
Output power:MAX. 200W
Working mode:MPPT, DC-DC
Size:12.5×6.5x4cm/4.9×2.6×1.6in
Weight:Approx.235G
Package lncluded
1 x Solar Boost controller
Recommendations
1. Please do not use the controller with overload. The maximum power of the photovoltaic panel of the 18V system is 200W. If there are two 18V photovoltaic panels, please use it in series or parallel; 36V
The maximum power of the photovoltaic panels of the system is 360W. If there are 2 or more modules, please use them in parallel. If the power is exceeded, please use it in parallel. Remarks:(Photovoltaic panel parameters:work
The operating voltage is 18V and the open circuit voltage is 22V; the operating voltage is 36V and the open circuit voltage is 44v; please read the parameters on the back of the photovoltaic panel before connecting. )
2. The controller will generate heat during operation. It is recommended to install it in a ventilated and heat-dissipating environment.
3. When the system is in use, it is recommended to connect a switch in series between the battery pack and the controller, and the solar panel and the controller, otherwise it will appear when wiring
The phenomenon of ignition; connecting the switch at the same time also guarantees the safety of the system.
4. It is very important for the battery pack to be fully charged at least once a month, otherwise the battery pack will suffer permanent damage. Only when entering the battery pack
The battery pack can be fully charged when the amount of energy is more than the energy used by the load. Users should keep this in mind when configuring the system.
Additional information
Weight | 0.277 kg |
---|
Reviews