Specification
Model:3FLD2-20-24-210/3FLD3-20-24-220/3FLD2-30-24-240/3FLD3-30-24-280/3FLD2-40-24-304/3FLD3-40-24-340
Max Head:20-40M(according to different model)
Max Flow:2m3/H / 3m3/H(according to different model)
Voltage:24V
Range of working voltage:DC 18V-45V
Power:210-340W(according to different model)
Diameter of pump:76mm(3Inch)
Outlet Diameter:32mm(1-1/4 Inch)
Length of cable:1m(3.28FT)
Weight:apprex. 4.6kg
Style Note
General Manual
:Model
01:3FLD2-20-24-210
02:3FLD3-20-24-220
03:3FLD2-30-24-240
04:3FLD3-30-24-280
05:3FLD2-40-24-304
06:3FLD3-40-24-340
Accessories
A complete range of accessories including 1m pure copper wire and the water pump with 32mm outlet. We can make longer copper wire according to the customer requirements..
You need totally about 420w (36v) solar panels. If the sun is not very well, you can use more solar panels
Features
1. Wide working voltage:18v-45v.
2. Over-voltage protection / Under-voltage protection:The pump will stop working automatically when the voltage is too high or too low; Then it will detect the voltage every 10 minutes, and it will start to work automatically when the voltage is between 18v-45v.
3. The pump can be directly connected to solar panels without battery in sunshine.
Solar Modules
The 12v solar water pump system are recommended to be powered by 18v Monocrystalline / Polycrystalline solar panels in parallel connection; The 24v solar water pump system are recommended to be powered by 36v Monocrystalline / Polycrystalline solar panels in parallel connection.
Notes
1. It is recommended to completely immerse the pump in the water tank, connect the UVW line, ensure the correctness of the wires, and then put it into the borehole for using.
2. WC, WH check if there is water in the well. Under normal conditions, there will be water in the well, so the latter two are closed. If you need to detect water in the well, you can configure it as shown.
3. Do not operate for long time when there is no water in the pump.
4. The pump is submersible pump, it must be full submerged in the water.
5. Copper wire required. ( PS:6 mm2 or 10 mm2 copper wire is required when the cable length is too long.)
6. The diameter of the pipe connected to the pump must bigger than 32 mm. Don’t block or bend the pipe/ inake/ outlet. Damage caused by the above is not covered by the warranty.
Additional information
| Weight | 4.5 kg |
|---|
Reviews