Specification
Size:Approx. 10.8cm x 5.2cm x 1.5cm/ 4.25×2.05×0.59“
Working Voltage:3.0V
Battery:2x CR 2032 Battery (Include)
Consumption:Max. 6mA
Resolution Rate:0.1°
Working Temperature:0-40°C
Blade width allows:20mm~75mm
Detection Angel:±90°
Feature
Have sensor updating and lock fuction
Automatic flip screen function
Adapt to 250~800mm main blads
Energy Saving:Shut automatic in three mins on the the alert status
Operation Guide
1. ON/OFF button is turn on/ turn off.
2. Hold button will stop the sensor from updating the angle that it senses
3. Zero button allows you to set inch0inch at any given position of the sensor. This allows you to see your travel at any interval.
Photos of Operation
1. Find horizontal plane referece point on the helicopter (eg:motor / tail)when helicopter stops .
2. Press Zero button after finding horizontal plane ( angle calculation will based on the horizontal plane)
3. Measure blades angle positive and negative ,accurate to 0.1 degree , support flip, very convenient.
4. Referece point change need to clear to 0 before calculation and find new horizontal plane .
Package Included
1 x Digital Pitch Gauge
Additional information
| Weight | 0.032 kg |
|---|
Reviews