This is without watch accessories,If you like with watch accessories
>>>with watch accessories:Click here to BUY
>>>More M5Stack Item:Click here to open
Description
M5Stick is a mini M5Stack, powered by ESP32. It is a portable, easy-to-use, open source, IoT development board.
What it can do This tiny block is able to realize your idea, enlight your creativity, and help with your IoT prototying in a very short time. It will takes away a lot of the pains form the development process.
M5stick is one of the core devices in M5Stack product series which is built in a continues growing hardware & software ecosystem. It has a lot of compatible modules & units, as well as the open source code & engineering community that will help you maximum your good in every step of the developing process.
Item Features
– 5V DC power supply
– USB Type-C
– ESP32-based
– 4 MByte Flash
– 6-Axis IMU SH200Q/MPU6886
– Red LED
– Buzzer
– IR transmitter
– 1 Buttons, OLED(1.3 inch), 1 Reset
– 2.4G Antenna:Proant 440
– 80 mAh Lipo Battery
– Extendable Socket
– Grove Port
– Wearable & Wall mounted
– Development Platform UIFlow, MicroPython, for
ESP32 Features
– 240 MHz dual core Tensilica LX6 microcontroller with 600 DMIPS
– Integrated 520 KB SRAM
– Integrated 802.11b/g/n HT40 Wi-Fi transceiver, baseband, stack and LWIP
– Integrated dual mode Bluetooth
– Hall sensor
– 10x capactive touch interface
– 32 kHz crystal oscillator
– PWM/timer input/output available on every GPIO pin
– SDIO master/salve 50MHz
– SD-card interface support
PinMap
RED LED & IR Transmitter & BUTTON A & BUTTON B
ESP32:GPIO10:GPIO9:GPIO37:GPIO39
RED LED:LED PIN::
IR Transmitter::Transmitter Pin:
Button A:::Button Pin
Button B::::Button Pin
TFT LCD
Driver IC:ST7735S
Resolution:80 * 160
ESP32:GPIO15:GPIO13:GPIO23:GPIO18:GPIO5
TFT LCD:TFT_MOSI:TFT_CLK:TFT_DC:TFT_RST:TFT_CS
GROVE PORT
ESP32:GPIO33:GPIO32:5V:GND
GROVE port:SCL:SDA:5V:GND
MIC (SPM1423)
ESP32:GPIO0:GPIO34
MICPHONE:SCL:SDA
6-Axis posture sensor (SH200Q/MPU6886) & power management IC (AXP192)
ESP32:GPIO22:GPIO21
6-Axis posture sensor:SCL:SDA
power management IC:SCL:SDA
Power on / off
Power on:Click the reset button
Shutdown:Double the reset button
datasheet
ESP32-PICO
ST7735S
BM8563
SH200Q
MPU6886
AXP192
SPM1423
Example
Comparision Between Different Development Kits of M5
For details click here
Download chart click here
M5StickC facory test code
M5StickC Vending Machine
Description
JoyC is a rocker module designed for the M5StickC.It supports two-hand operation. Embedded STM32F030F4 main control chip, using I2C communication protocol and host M5StickC for data transmission. The ran ge of the joystick is 0~200, there are 12 RGB LEDs under the left and right joysticks, and the bottom of the joystick is equipped with a 16340 battery base for continuous battery life.
Product Features
STM32F030F4 inside
communication protocol:I2C (address:0x38)
support omni-directional movement/button press
Weight & Dimension
Dimension:200mm x 55mm x 50mm
Weight:81g(include Battery)
Application
Game Handle
Wireless Joystick Device
Communication protocol
I2C address:0x38
Package Included
1 x M5StickC
1 x USB Type-C cable
1 x JoyC
1 x 16340 Battery
Additional information
| Weight | 0.152 kg |
|---|
Reviews