Description
ESP32CAM is a development board for image recognition. It features an ESP32(4M Flash + 520K RAM) chip and 2-Megapixel carmera(OV2640). It also supports image transmission via Wi-Fi and debuging through USB Type-C port.
The hardware comes preloaded software, programmed by ESP-IDF. It is an application to run Wi-Fi camera. The output image is size 600*800, since it’s 2-Maga camera, you sure can optimize the software to output the maximum size of photos.
what this software can do
Power the board via USB type-C or GROVE
Use your phone to Wi-Fi scan an AP name start with ‘m5stack-‘ and click to connect this AP.
Open up web browser on your phone and visit 192.168.4.1
Then here comes the picture. Video is about 5-6 frames per senconds. not super fast.
The hardware also comes with some reserved weld pad, just if you want put these chips back on board.
9-axis gyroscope (MPU6050)
pressure sensor (BME280)
analog MIC (SPQ2410)
Lipo Battery power pins
ESP32CAM is the most popular pattern among the M5 camera series so far. If you need more storage please check M5Camera. If you need fisheye lens, please check M5CameraF.
Product Features
ESP32 specifications Dual-core Tensilica LX6 microprocessor
Up to 240MHz clock frequency
520KB internal RAM
4MB Flash memory
Integrated 802.11 BGN WiFi transceiver
Integrated dual-mode Bluetooth (classic and BLE)
Hardware accelerated encryption (AES, SHA2, ECC, RSA-4096)
CP2104 USB TTL
ESP32 chip set + 3D Antenna
OV2640 sensor Output Formats(8-bit):YUV(422/420)/YCbCr422
RGB565/555
8-bit compressed data
8-/10-bit Raw RGB data
Maximum Image Transfer Rate UXGA/SXGA:15fps
SVGA:30fps
CIF:60fps
Scan Mode:Progressive
Camera specifications Field of View:65 degree
Maxmium Pixel:2M
Size:20.5 ≠ 46.5 ≠ 11.5mm
Product Size:46.5mm x 19.5mm x 11.7mm
Product weight:6.3g
Package Include
1x ESP32CAM Unit
EasyLoader
click to download EasyLoader
1.EasyLoader is a simple and fast program burner, and each product page has a product-related case program for EasyLoader.
2.After downloading the software, double-click to run the application, connect the M5 device to the computer via the data cable, select the port parameters, and click ‘Burn’ to start burning.
3.The CP210X (USB driver) needs to be installed before the EasyLoader is burned. Click here to view the driver installation tutorial
PinMap
Camera Interface PinMap
Interface
OV2640 Pin
ESP32Cam
SCCB Clock
SIOC
IO23
SCCB Data
SIOD
IO25
System Clock
XCLK
IO27
Vertical Sync
VSYNC
IO22
Horizontal Reference
HREF
IO26
Pixel Clock
PCLK
IO21
Pixel Data Bit 0
D2
IO17
Pixel Data Bit 1
D3
IO35
Pixel Data Bit 2
D4
IO34
Pixel Data Bit 3
D5
IO5
Pixel Data Bit 4
D6
IO39
Pixel Data Bit 5
D7
Additional information
Weight | 0.017 kg |
---|
Reviews