Feature
Product Name:Digital display embedded cabinet thermostat
Product model:XH-W2060
Temperature range:-19~99 °C
Control range:-19~99 °C
Temperature control accuracy:1 °C
Measurement input:NTC10K waterproof probe L = 1 m
Refresh rate:4 times / sec
Use environment:-30~60°C Humidity 20%-85%
Use environment:12/24/220V optional
Output type:Relay output up to 10A
Appearance size:77 x 62 x 34.5mm
Opening size:71 x 29mm
Other functions:Power-off memory, state memory, temperature correction, delay start
Code:Code Description:Setting Range:Factory settings:Unit
P0:Operating mode:C/H:C:/
P1:Hysteresis setting:0.1-50:2:°C
P2:Temperature correction:-9~9:0:°C
P3:Delayed start:0-9:0:Minute
P4:High temperature alarm:-19~99:99:°C
P0:Temperature control mode
C:Cooling mode H:Heating mode
P1:Difference setting
For example:P1=5
Cooling mode:When the detected temperature reaches the stop temperature, the relay is disconnected, the cooling is stopped, the temperature rises by 5 °C, and the relay closes again.
Heating mode:When the detected temperature reaches the stop temperature, the relay is disconnected, the heating is stopped, the temperature drops back to 5 °C, and the relay closes again.
P2:Temperature correction
If the detected temperature and the actual temperature deviate, you can use this function to correct. Actual value = measured value + corrected value. For example, if the measured temperature is 25 ° C and the actual temperature is 26 ° C, then P2 can be set to 1, then The final temperature is 25+1=26
P3:Delayed start
This function is used for compressor cooling. If it is used in a refrigerator freezer, this value must be set. According to the compressor back pressure, the value is usually set to 3-6 minutes.
P4:High temperature alarm
Set the high temperature alarm value. When the detected temperature exceeds this value, the screen flashes and the buzzer sounds an alarm.
Package includes
1 x Digital display embedded cabinet thermostat
Additional information
| Weight | 0.15 kg |
|---|
Reviews