Feature
Single chip silicon bipolar device, amplitude / phase measurement
The AD8302 is a fully integrated RF IC that measures the amplitude and phase between two independent input signals. The device operates from low frequencies to 2.7 GHz.
The AD8302 contains two precision-matched wideband log amps, a wideband linear multiplier/phase detector, a 1.8V precision voltage reference, and an analog output proportional operation circuit.
The input signal range is -60 dBm to 0dBm (reference impedance 50Ω) with a corresponding dynamic range of 60dB.
The AD8302 output provides accurate amplitude measurements in the +/-30dB range with a slope of 30mV/dB; a phase measurement range of 0 to 180° with a slope of 10mV/degree.
Note:Please refer to application note AN-691 for module low frequency detection. The AD8302 is available in a 14-pin TSSOP package and operates over a temperature range of -40°C to 85°C.
Module application
1. Measurement of insertion loss and phase of an amplifier, filter or mixer
2. Measure the vector reflection coefficient of any load
3. Impedance analysis
Support cable
BNC male to SMA maleSMA male to SMA male
Frequency Hz:Signal source
RMS@50 ohm:Source phase (degrees):Output voltage V
CH1:CH2:CH1:CH2:VM:VP
500K:0.2V:0.2V:0:90:0.908V:0.907V
500K:0.1V:0.2V:0:90:0.724V:0.906V
500K:0.2V:0.1V:0:90:1.093V:0.908V
500K:0.2V:0.2V:0:180:0.908V:0.032V
500K:0.2V:0.1V:0:180:1.094V:0.023V
500K:0.1V:0.2V:0:180:0.725V:0.022V
500K:0.2V /:0.2V:0:-90:0.908V:0.915V
500K:0.1V:0.2V:0:-90:0.725V:0.914V
500K:0.2V /:0.1V:0:-90:1.093V:0.915V
500K:0.2V:0.2V:0:-180:0.909V:0.032V
500K:0.2V /:0.1V:0:-180:1.093V:0.022V
500K:0.1V:0.2V:0:-180:0.724V:0.021V
Package includes
3 x AD8302 module
Additional information
| Weight | 0.036 kg |
|---|
Reviews